I decided on cleaning my laptop fans today, which I’ve been procrastinating for about a year now because of this one screw. But I just can’t seem to open this with my screwdriver, since whatever I did back when I last opened it it’s nearly circular now. Is there a way to unscrew this?

    • Fernlike@sh.itjust.worksOP
      link
      fedilink
      arrow-up
      4
      ·
      2 months ago

      I don’t really have superglue right now, and the screw looks like this far up, not sure it can be called tight or not.

      (Screwdriver for comparison, couldn’t really find something better.)

      • cooljimy84@lemmy.world
        link
        fedilink
        arrow-up
        1
        ·
        2 months ago

        You could also padding out the screwdriver tip or the screw hole. I’ve used sticky tape before, but again if its tight your pretty much out of luck…

    • Broken_Monitor@lemmy.world
      link
      fedilink
      arrow-up
      1
      ·
      2 months ago

      Pretty much this - depending how much surface area and how good the glue is you might get it or you might snap that right off too. If it fails the next step is to carefully drill the screw out. A somewhat riskier operation but itll get it open