Gotta ask have you been in school in the past 20 years?
I’m not sure if any state school has lessons divided by gender aside from P.E. and possibly some Sex Ed lessons…
Gender division in schooling was certainly a thing in the 70’s and probably the 80’s.
I’ve tried watching it about 5 times and get to different points before I burn out.
It has sparked an interest in the works of R.D. Laing for who Lain is named in reference to.
A Psychologist who was active in the 60’s and is famous for their work with schizophrenics; I’ve been curious if their work may give a bit more context to understand Serial Experiments Lain
Doesn’t it provide a safe way of preserving food that housing built before personal refrigeration became common won’t have (a larder, basement, or even shaded garden)?
Methods of refrigeration become especially important if you do not have a regular way of retrieving food.
Not to mention, even cooked vegan food can and will spoil quicker without refrigeration.
My mum’s a child psychotherapist, from her perspective medication aught not to be the first thing people jump at, but it very much has it’s place; an example being children with ADHD who literally cannot sit down to the point of them getting distressed, actually being able to sit down and engage with therapy after starting medication. Similar things with anxiety and depression, if anxiety holds you back from opening up and personal thoughts and feelings then medication can enable that for therapeutic work to begin.
The bigger issue she has is when people (often parents) only want the medication but don’t want to try and engage with the therapy.
Just something to think about
Communism is from each according to their ability, to each according to their want.
I thought it was “From each according to their ability, to each according to their need”?
Wants and needs are often conflated but the outcomes of each phase would likely look incredibly different.
Huh, same here, that’s odd
What type of tub is it? Free standing or one with a panel on the side?
If one with a panel on the side you can remove them by cutting the silicone, which will enable you to see the drain pipe and the trap, and you can then inspect it for leaks (use a dry piece of paper towel to test if a leak continues after drying it initially)
If it’s due to a leak from the water supply pipes you could try turning off your water at the source/stop tap, open up your all the taps in the house and drain your system (I wouldn’t suggest doing this if you have a water storage tank). If the dripping stops after doing this, it’s likely to be your water supply pipes, as opposed to the drain.
I’m honestly surprised no-one has built an extension to automatically opt out of them, or at least the major cookie providers interfaces.
I realise there are many extensions which outright block cookies, etc; I’m meaning specifically the annoying dialogues you describe
Wow, 3DS as well…
Wait, PSP‽
If you really want that passive poison effect, you need to get fiestaware: bright orange/yellow ceramics where the concentration of uranium is way higher and it’s used as the glaze!
It’s known to leech into acidic foods, such as tomato sauces with pasta.
I also feel like we can also add antique top hats to this; I recently found out that my grandfather’s childhood top hat, which I used to play with all the time growing up, contains mercury nitrate
Are you meaning because people are excited about “fusion” being a possible future energy source, whereas when they here “nuclear” their minds immediately go to weapons and fission accidents and pollution?
My friend has so far fried 4 or 5 steamdecks, ROG Ally and two power banks before he took my advice to buy a type c cable tester and to stop using any charger that didn’t come with the device until he could test them.
Turned out it was a damaged cable, I think it was a CC line was no longer working.
I’ve had a couple of cheaper Chinese type c and usb A multi port chargers fail; I manage to fry like 3 sex toys before I realised the type A ports were outputting 12v, and at some point something went wrong and the type c fried my phone (which I guess is on me for continuing to use the charger after the issue with the type A ports)
You aren’t wrong, but as someone who managed to screw up and damaged the copper traces when trying to resolder an old mini-usb back onto my old keyboard; you do really need to have a good understanding and a lot of practice with SMDs and temperature control.
I went from a less than 50% success ratio when resoldering SMD LEDs to about 95% success after I bought a £20 mini-heatgun with a narrow (5mm) nozzle
+1 for prusa if you want to spend more and get something that just works with no fuss, if you’re wanting to go cheap&cheerful an Ender 3 will be a good option as well if you don’t mind the occasional bit of tinkering for about half the price, as it’s probably one of the most supported printers by the community and newer ones come with Auto bed leveling and half of the fancy stuff you had to add on back in the day.
I’d spend any money saved building/buying an enclosure and something to run octoprint with (Raspberry pi or a spare android phone)
To add, it’s often worth investing in a mini heatgun for desoldering/resoldering, typically it’s near impossible to resolder the pins by hand as they are so fine.
Same with many other surface mount components
They don’t necessarily require a starter explosive, certain types do of course. It’s more about overcoming the initial energy required, for example the arc from an electric arc lighter could probably overcome that requirement in a lot of scenarios.
For the texture/pattern around the edges where the squares are cut off; I would either remove them or taper them down towards the edges, so they are less likely to catch and eventually pull away.
Otherwise, this is a very cool idea that I’d like to see updates on!
Idk how true that is, it’ll be highly dependent on what you’re trying to dissolve.
This sounds to me more like the advice I’ve heard for using isopropyl for sterilizing equipment and surfaces, its more to do with how quickly the pure stuff evaporates. Evaporate too quickly and it doesn’t sterilize, whereas 70% is best of both worlds.
To freak us out when we’re a little bit too high…
I get what you’re trying to say, but that still isn’t exactly accurate.
If you measure the herb before and after, it’ll give you the total of evaporated difference, but this difference will not reflect the actual THC/CBD consumed, you’ve got terpenes and other volatile compound in there as well, adding weight.
Nor does it account for losses due to condensation on the inside of the vape.
If you know how much it your herb is THC/CBD, then you estimate with a reasonable degree of accuracy.
Also now that I’ve written this out, I realise how “Well actually…” this is; my bad.
Love the username btw, what vape do you use if you don’t mind my asking?