The commercial alternative to blender is software like Maya. But I too struggled with Blender, however I feel that’s because 3D modelling is different from CAD, since modelling is like molding clay into the shape you want it in, rather than accurately measuring it out like in CAD.

Yeah Fusion is the way to go, especially if you are learning. Lots of hate for it around here, due to Autodesk endlessly changing their policies. But there’s no point in learning the basics when you don’t know if it’s you… or the software.

But if your issue is just navigating the 3D space in FreeCAD, you can set it such that it’s the same in TinkerCAD/Fusion 360. FreeCAD calls it Revit, and you can set it in the lower right corner. Hold you mouse over it to show tool tips.

In my view CAD is always worth learning, especially if you understand what prints best on your printer.

FreeCAD is basically the worse possible beginners tools. Don’t get me wrong when you learn it, it’s good and comparable to professional CAD software. But the learning curve is dumb.

Learn the basics first. TinkerCAD is free (from Autodesk) and will get you started. But if you want something which would take you further Fusion360 is fantastic for beginners.

The workflow of CAD is as follows. Sketch -> Action -> Sketch -> Action. Lets say you want to make a box with a hole in it. Sketch the outer box -> Extrude it -> Sketch the inner box -> Extrude/Cut it.

Yeah, we’ll see. I presume it’ll be fine… Or cool enough not to melt the PLA

… usually comments like this imply I goofed on spelling, but I can’t see which word it was. Can you point it out to me plz?

While I can see why there’s a lot of doubt I can see one reason they would.

For years now Apple has been moving things in house, like moving from Intel to their own designs and chips. And moving away from Snapdragon to their own modems.

If they wanted to buy intel it would be for their fab capabilities to reduce their reliance on TSMC.

Do I think they will… probably not, but as I said, I can see why they would.

Here’s the guide I used: https://www.standingpad.org/posts/2024/06/affinity-on-linux/

The only thing I did differently was I used this yaml to make the container: https://gist.github.com/gnat/8b69cf49b68e2349afe5e8cb5af49bf8

There’s a bit of tinkering afterwards, but it runs.

Pretty stable from my testing, outside of a few crashes when I was asking too much of it.

That said Inkscape/gimp/kirta are good alternatives if you are in the market.

While it’s a pain to setup, Affinity does work in Bottles and a specific build of Wine. Not easy to do, but it’s possible.

Only if you live in the US or UK. Lol I didn’t realize Amazon’s international kneecapping of their products moved to include hardware along with software.

For context if you are Canadian you don’t get access to overdrive or audiobooks on Kindle. Fun fact this also includes their fire tablets.

So if I download a pirate copy, I’m in the clear because I purchased a license.

Nope since the copy of the software was obtained with someone else’s license. That said this would be hypothetically impossible to prove in court so 🤷

Circumventing DRM is questionable since I think it’s illegal to distribute but not own. So let’s say you have a CD installer for the Sims and download a crack exe to launch it without the CD. You are in the clear but the host for the download is not.

GOG or backing the game up yourself is the only way around this.

Honestly if you are looking to move to Canada, they are desperately looking for Nurses especially out in Eastern Canada like Nova Scotia and New Brunswick.

Immigration is being tightened right now, but if you already have a degree and looking to get recertified here its a good starting point.

Source: lived in Halifax for 5 years and know a connection or two in that industry

Because printing in Linux both works and is supported and not supported and hope that there are drivers and they work.

For example, I have a brother printer and in both arch and Ubuntu/mint the printer worked out of the box. But I was missing features like double sided printing. So I had to download drivers for it.

In arch the drivers were on the AUR, so I was printing is seconds.

In Ubuntu/mint they weren’t in my package manager, so I had to go to brother’s website and hope they had drivers. Brother did and while it took a bit it did work too. No worse than windows.

Twaddle: something insignificant or worthless or another word Nonsense.

Discovered this word while reading the dictionary during silent reading in English and they wouldn’t let me play games.

Welp I guess this also includes NSO games.

I’m not worried, after all I didn’t use any emulators

For me I was looking for reliability, so I ended up with Prusa. But I ended up with them thanks to a few simple rules I followed.

1. Can the machine and it’s parts be replaced with off shelf components?

2. Does it use, or is the platform compatible with open source slicers (Prusaslicer/Cura)?

3. Does the community support the device with mods on 3D model repositories (Thingiverse/Printables)?

4. Does the manufacturer have a track record for support (or the lack thereof)?

Before I got my Prusa, the Creality Ender 3 was the goto, and it was a really reliable machine. For my printing needs I need a direct drive print head, and a better auto bed leveling routine. But the Ender 3 s1 looks pretty good as an alternative.

I’ve use metal watch bands for years instead of silicone. Current one was for my Pebble time I got from Fossil and it’s still going strong.

I personally use a metal watch band for myself. I react poorly to p/leather and silicone and I’ve used a watch band I first got as a substitute for my Pebble Time. Might be from Fossil, but any old stainless steel metal band works for me.

Ditto, but I don’t exercise as much as they do so I assume its longevity is based off of how much you sweat.