This is not a conversation about guns. This is a conversation about items that have withstood abuse that are near unbreakable.
Some items I have heard referenced as AK47 of:
Gerber MP600: It’s a multi tool
Old Thinkpad Laptops
Mag lights
Toyota Hilux
panasonic microwave from 1996. I hope i don’t jinx it by posting about it here. Gigabyte Ultra Durable mainboards. IBM Model M keyboard PROXXON tools
Also, this is an old meme, and a bit outdated for our times, but no one has mentioned it so ill do it. The Nokia 3310. Truly the AK-47 of phones.
My 99 honda civic had nearly 250,000 miles on it the day that it was stolen. When it was found, the thieves had gutted the dashboard of electronics and had removed wheels and other parts. When it was discovered by the police, they towed it to the city in-pound lot and failed to contact me for a couple days because the license plate had been painted over for some reason.
Unfortunately the lot and towing fees ended up being more than what I paid for the car. I wasnt very well off at the time, so I surrendered it to the city. I assumed it would be scrapped for parts.
6 months later it was served to me in ad for Facebook Marketplace. Some guy had fixed it up and had been driving it regularly for months with no issue.
I still wish that I had bought it from him. I fuckin loved that car. I used it to deliver pizzas for 2 years, so i wasnt even that easy on it. I never had a major engine or transmission issue with it and the minor issues that I had were easy for me to fix myself. I bet it’s still running out there somewhere.
Should have gone to court over it. It was stolen, not your fault at all.
The P4$.FL 44 BF.A OBVIOUSLY guys why has no one mentioned it? Jesus Christ it’s like you want them to break!
^The comments in this thread
I think every Swedish household i’ve ever been in has owned the same Moccamaster coffee brewer for over 15 years. My parents have had the same one for over 20 years probably, swear those are indestructible.
Carolina Outdoor Work Boots.
Like wearing a bulletproof vest on your feet.
Thank you for the recommendation :)
I’ve been searching for steel toes ever since I was burned by Red Wings.
That metal toaster we got for a wedding present. It was apparently someone’s parents wedding present from the 60’s. We had it for several years until a friend jammed a bagel in it and melted the cord. I replaced the cord and we used it for another several years before losing it in a move.
I like to believe someone found it and it is still toasting to this day.
Was it one of those automatic toasters? Technology connections made a video on it.
Sony MDR-V6. I’ve had them for 15+ years, only had to change ear pads to velour ones after the first 5 years of use, after that 10+ years, no issues.
Aeropress coffee maker.
Its like 20$, works really well, very simple design with few things to break.
What’s a French press? I’ve only seen drip pots in my life so I’m completely ignorant to the coffee world.
It’s like a small pitcher with a movable filter, you put in the ground coffee, hit water, stir, wait, push down the filter with the grounds, pour off the coffee with most of the ground staying in the French press.
So why not use a dripper? I’ve always wanted to get into coffee and want to try an espresso so bad lol
So why not use a dripper?
Whereas a drip just passes through the coffee, a French Press is more of a steep. You get a stronger taste from it than you would on a drip.
Espresso is a whole other thing, expensive to get into at home. It uses a much finer grind and (IIRC) the water is pushed through under pressure.
Wild. That’s kinda intricate coffee for most people is just a simple process and keep moving. Thanks for the knowledge! I appreciate the write up.
French press is basically the same work as a drip machine, but a different shape. You just heat the water seperately and then pour it and the coffee into the French press, let it sit, press the plunger down, and pour. Actually takes slightly less time than any cheap dropper I’ve used and runs 0 risk of burning the coffee (drip machines like to put heating elements into their bases to keep the pot hot, this can burn the coffee and ruin the flavor, French presses cannot burn coffee because they cannot add heat)
Espresso is finely ground coffee that uses steam pressure to brew (thus why espresso machines are fucking expensive, my mr coffee unit was 80 buck), it’s an involved process (worth learning gif you’ve got 20m to make a cup of coffee every time) but very good if you use beans you like AND you like your coffee flavor strong
Thanks for the detailed right up. I’m actually thinking of trying a French press now that several of you have taught me the mechanics. Seems a lot better than an old dripper but not so slow like an espresso. I Just thought those were cool because the tiny cup 😂
I switched to a French Press recently-ish. Instead of 4 or 5 cups of weaker coffee from my single serve drip thingie, I have 2 strong cups from my French Press and am ready to go. I’m thinking about trying a pourover to see how that is. Espresso is tasty and strong, but I don’t think I’d want it NEARLY enough to justify a machine. I usually only do espresso when I’m traveling, makes me feel fancy having a latte in the big city haha.
All that said, coffee is very individual. There is no “right” answer. If you’re happy with drip, than drip is the way. :)
If you want pseudo espresso grab a moka pot. You can snag them for like $20-50 and they make a good strong espresso style brew on your stove.
There is a Sub-Lem for that: https://slrpnk.net/c/buyitforlife
Thank you!
I thought we called them communities, but honestly I like sub-lem better. Let’s switch if we haven’t already.
Gotta be the KitchenAid mixers no? Especially the older ones. I have a friend that has one from his grandma that’s over 50 years old. If anything breaks, it’s usually a gear or something simple to fix, and the parts are easy to buy and generally cheap.
The mixers are not exactly cheap though… and their other stuff is now mostly made from plastic (like the food processors for example)
I’ve managed to get a hold of 3 of the old ones through garage or estate sales, but yeah the ones that are brand new have plastic parts in them which drives me crazy. But you can at least 3d print what you’re missing
Shure SM58/57
SM57s still can get roughed up pretty bad with the plastic covering on the front of the mic (especially if miking a snare drum with a less than precise drummer). SM58 will survive a nuclear war.
Bodum French Press
Dynavap DHV
Buffalo Bicycles
Vitamix Blender
I can’t find “DHV”, I guess that’s an old model? What would you recommend for something modern that “just works”?
DHV = dry herb vape.
All the dynavaps share the same rip so pick any one you like. I just use the basic stainless one.
If I were to get a new one today I would likely get the TinyMight v2. However I cannot speak for its reliability as I don’t have one.
Concept2 rowing machines. Even if they break, you can still buy spare parts at reasonable rates even for the very first model, which is decades old and only sold a few copies. Fantastic engineering.
Hold their value like crazy too even if you don’t like them you likely lose nothing if not very very little.
I bought my model D used for $250, if I ever sell it I’ll turn a profit :P
It’s a real baader-meinhoff phenomenon: once you notice them, you notice that every gym has them.
I’ve been interested in this subject for a while and have a few recommendations.
Stanley Thermos. It could get hit by a fucking train and would still outlive you. Don’t recommend putting cofee/milk products etc in them though because it will make the gasket smell. Excellent water container though.
Double edged straight razor. The handle piece is virtually indestructible. I bought a package of like 500 blades for like 30 dollars and haven’t had to buy new ones for actual years. Fun fact as well, once you learn to use one it’s better for sensitive skin because you’re only dragging one razor across your skin per stroke instead of 5 or 7 or whatever the fuck the “better” ones have. Can confirm the “more blades = better” shit is just pure predatory marketing.
Buck knife. Multi tools are cool but if you tend to use the knife often, invest in a higher quality knife and stones to sharpen it. Sharpening stones (not the crap ceramic stuff they try to sell) will last a lifetime and will also keep all your kitchen knives beautiful for years. While you’re up to it, get a piece of raw leather, like the back of of an old belt, and use it as a strop to polish off the blade when you’re done sharpening, it really does make the cut smoother.
People say Mag light, but I’d personally recommend Olight as well for flashlights. The Olight Baton 4 is a ~600 lumen adjustable brightness flashlight with strobe which will blind you if you aren’t careful and its smaller than a pill bottle and comes with a reversible clip and inset magnet in case you need to stick it somewhere to keep the light steady.
A graphite metal “magic” pencil. Instead of using normal graphite, these metal bodied pencils have end pieces you screw in as a tip, are erasable, and one nib takes forever to run out, something like 5 pencils. They dont draw as dark as a regular pencil due to the hardness but for general usage they are handy.
Mighty plugs ear plugs. Want to know what it’s like to be deaf? Buy these. They aren’t too costly, completely seal the ear, and I only have to get a new package once every few years. They’re so effective I had to purchase an alarm clock built for deaf people which shakes my mattress instead of making a sound because I couldn’t hear any normal alarm clock after I started using these. This combination is unbeatable if you have awful neighbors or live on a busy street with night traffic.
Any self winding watch. Stop fucking around with button cell batteries and evolve. If it’s cheap, that’s probably better, if it gets scratched you don’t have to care. Seiko is a good brand in my experience.
If you’re into camping get a decent mid sized carving hatchet. I have a mid sized Hultafors swedish steel one. People like splitting axes because they do what they’re advertised to do, but theyre huge, heavy, and you cant carve or skin with them. A lighter smaller carving axe will do the same job splitting a log if you baton it with a medium sized stick. If you need something bigger to cut down a tree, go for a curved folding saw to bring with the hatchet. The Silky Saw Big Boy is great for that. Also buy a wool blanket. That shit will keep you warm in -35 C if you use it correctly. Also tents are neat but cumbersome, instead invest in a tarp and learn to make a lean to/other tarp configurations in combination with a ground sheet. If you expect you’ll be facing inclement or extremely wet weather, get an oilskin tarp (or make one yourself its literally just a cotton sheet which you have ran through a few dryer cycles as hot as possible, and then soaked through in a 50/50 mix of boiled linseed oil and mineral spirits and hung outside until completely dry. Don’t put an open flame near it at any point in that process).
I probably have a bunch more, but can’t think of them off the top of my head.
Just bought some earplugs. They better be legit! I use silicone earplugs right now and they’re okay but on nights when my husband is really stuffy, he’s like a chainsaw.
The ones I recommended are similar to some other silicone ones, but are a bit softer. As a result I find they seal better in comparison. I had been using silicone ones prior to discovering these and they are definitely my preference.
Thank you! Fingers crossed that they’re even better than the ones I’m currently using. Which are pretty good (Eargasms) but don’t have a super high decibel rating and I definitely have to toss each pair after about a week and a half of wearing them every night, just because they stop being as…sticky? They’re not really sticky but they do adhere when they’re fresh, and not so much after a few days.
I see. Over a long enough time I do find that these ones harden as well at which point I change them, however that’s usually a month or more instead of a couple weeks. I hope they work out well for you should you buy!
As heads up as well, the little pucks they come as are way too big for my ears, but you don’t want them to be too small either.
These are amorphous like a sort of putty, so I usually tear a puck in half, and then another into quarters, and then mash them together such that I have 75% the size of a puck for each ear. This insures they completely seal my ear, but also cant get stuck or anything.
This also has the benefit of not needing to worry about sizing though!
Wait, you’re saying not to use coffee in a Stanley thermos?? Even if I don’t have milk in it too? What’s it for then, only soup?
Yea or water is what I primarily use it for. You CAN put coffee and such in there however, you will want to take off the gasket and clean the hell out of it. It absorbs smells quite strongly. You could also probably get a different gasket which is not as bad for it. Should the gasket begin to smell, I recommend soaking it over night in vinegar, and then another night in water. This really seems to suck the smell out of it.
In that case, it’s probably any gasket that’s susceptible to this, coffee is really strong-smelling. My Zojirushi thermos is only used for coffee, for this reason…
It can probably affect all gaskets, but depending on the type of rubber some might be better or worse. I haven’t played around enough with testing different ones to know for certain though.
Maybe silicone would be a good material for this?
I’m totally fed up with the usual 5-bladed razor crap from Gillette and especially Wilkinson. But I’ve always been to afraid to use an old school double-edged razor because I only, blindly, shave my head with it and maybe my pubes. Seems more risky. Any advice / recommendations?
I’ve been getting the razors from Aldi’s for when I (rarely) clean shave. Can’t tell the difference from the “fancy” brands
It’s like anything, you get used to it after some practice. Definitely not as daunting as you think.
You can either start with one of the milder razors sold by Edwin Jagger, Muhle or Merkur and pair with a moderate blade such as the Gillette Silver Blue OR get a good adjustable razor such as the Merkur Progress or Merkur Future and again pair with a moderate blade. Do not start with Feather blades.
I’ve been shaving my head and my balls with safety razors for like 15 years. Get some nice soap like sandalwood, cedar, lavender, frankincense, sasquatch or whatever name they’re calling it these days and make a lather on your body in the shower. A lather from actual soap is critical to avoiding nicks, cuts, and especially razor burn. Use a new blade and gently drag the razor across your skin. Use short strokes, not long passes. Clean the razor. Add more lather when needed. Don’t press hard or move the razor sideways or diagonally. That’s how you cut yourself. Watch out and take care for any bumps and rounded corners, like warts, the back of your jaw, or any sagittal crest you may have. Hold the razor with one hand and use the other to feel for hair and smoothness. Make a pass with the grain and another against the grain. Reapply lather between passes.
Maybe before you begin, shave a little hair off your arm or leg to test the angle you hold the razor. The sensation of individual hairs being cut will be tactile and satisfying. When it’s right, it’ll feel right.
Get a sharps container for used blades. It’ll take a lifetime to fill. Blades only cost like a dime, so just treat yourself and use a new one every time.
It ain’t too difficult. Just be gentle, take short and slow strokes, feel your way around, and don’t shave dry skin. You may be surprised how easy it is. They’re called safety razors for a reason.
Guess I’m getting a safety razor for Christmas then. It really sounds easy enough. I usually combine showering and shaving so lather really shouldn’t be a problem. Thanks!
You won’t regret it. Safety razors, and if you decide to, straight razors are far superior. I used a safety razor for a few years and then decided to get a Dovo straight razor and I love it.
Its a matter of practice. Just know that as long as you only move the razor in a straight line and dont wobble it side to side, you cant fuck up too bad. You want to learn to hold the razor such that it is always meeting the surface of your skin at a 45 degree angle, use very short strokes, and use your other hand to pull your skin taught.
You also want to remember that, especially when starting out, you dont have to do a great job on the first or even second pass. Do the best you can, and if there is still hair, just re-apply shaving cream and go over those spots again. Eventually you get good enough you can get everything in a single pass most of the time.
There are some good videos on youtube where people have tutorials on learning to use one. Also because it cuts closer to the skin, you may want to invest in a face moisturizer in addition to an aftershave. Really helps to prevent ingrown hairs and makes your face feel amazing after shaving with one. For pubes/longer hair, I would shave with an electric shaver first to shorten the hairs, and then follow up with the razor.
For those more sensitive areas you want to make sure you’re getting a razor body where the blade doesn’t protrude as far. Henson shavers are incredible quality but I dont remember if they have a razor body suited for body hair.
The idea with these razors is to not apply much pressure, just letting the weight of the razor itself do the pressing. As long as youre doing that, and not holding it at a stupid angle, you should find it quite difficult to hurt yourself shaving your head. Same goes for your pubes, but if you’re going to shave your balls with it you’ll need to take a lot of care.
I’ve been shaving with a DE razor for about 15 years now, and I haven’t found it any easier or harder to cut yourself with them than the modern “Mach 84 Spike TV Edition” cartridge razors.
Just ordered a Henson razor today. Heard good things about it and it was also recommended here. Also I still had a promo code.
Instead of a curved folding saw I prefer a rope saw. I’ve always been able to take down limbs and trees faster.
For those that don’t know what that is, imagine a chainsaw chain with handles on either end.
Do you use one that is actual chain, or braided wire? I’ve used the braided wire saws, and I like how tiny/light they are, but I’ve never used one of the chain style saws to see if the weight/volume increase is worth it.
Mine is the chain style. I cannot compare as I have never used the braided wire and I don’t have to think about weight savings that much. I don’t generally hike far to a camping spot.
Rope saws are neat as fuck as well.
have ran
have run
While this does appear to be a grammatical error, Wiktionary also lists it as a dialectical, nonstandard past participle of run, so it looks like some people use it depending on where they’re from, including myself it seems.
I suppose I select ran as the past participle because in other cases where I use it in past tense, run does not sound correct to me.
For example where I am from, I would say someone “ran” from the police, instead of that someone “had run” from the police, so I default to this version of the word in these cases.
right?!?
deleted by creator
